Involute Spline Gear Hob with DIN 5482
2021-11-09 13:23:47
jiangxingTools
4353
Involute Spline Gear Hob with DIN 5482
hobs for spline shafts with involute flanks previously DIN 5482
30° pressure angle
quality grade A to DIN 3968
single start, right-handed
with keyway
For cutting spline shafts as per ANSI, DIN Standards, Involute Spline hobs have a stud tooth depth for cutting all types of standard and non-standard involute splines where as straight spline hobs are used for cutting parallel splines and are manufactured in single or multi start design with pressure angles 20°, 30°, 37.5° and 45°.
相關(guān)文章
-
PA20° Pre-shaving Gear Hobber with Module m2.5
PA20° Pre-shaving Gear Hobber with Module m2.5Tooth profile：GB standardMaterial：HSS M2, M35, ASP2052... - Timing Pulley Hob for G.T
- Standard Chain Sprocket Hobs
- PA20° Module m9 Standard Involute Gear Hob Cutter
- PA20° DIN3972 Standard Gear Hob with Module m14
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m5
- Disk Type Shaper Cutters with GB 6081
