Bohler S500 for Shaper Cutters and Hobs
2022-08-19 14:14:00
jiangxingTools
2434
Bohler S500 for Shaper Cutters and Hobs
Material composition of S500: C-1.10, Si-0.50, Mn-0.20, Cr-3.90, Mo-9.20, V-1.00, W-1.40, Co-7.80
Standard: 1.3247, HS2-9-1-8, EN ISO 4957
Performance feature of Shaper Cutters and Hobs with S500:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
-
PA20° Profile DIN3972 Standard Gear Cutter Hob with Module m6
PA20° Profile DIN3972 Standard Gear Cutter Hob with Module m6Tooth profile：DIN3972-2 standard, GBMat... - Nominal PCD 180mm M2.75 Gear Shaving Cutter with PA20°
- Shank Type Worm Wheel Hob with Module m6
- Rectangle Spline Hob
- Deep Counterbore Type Shaper Cutters with DIN 1826
- DIN3972 Standard Module Involute Gear Hob Cutter
- M42, M35, M2 Timing Pulley Hobs with TiN, AP Coating
